The basic structure of metal stamping die
Metal stamping die structure can be divided into upper and lower mold.The
upper mold is made up of die handle (punch), guide sleeve, punch, pad, fixed
plate, screw, pin, upper die (upper), and release plate.The lower mould is
usually composed of the lower mould base, the guide plate (side guide plate),
the concave mould, the baffle plate, the bearing plate, the guide post, the
screw and the pin.
It is important to note that not all of the stamping die structures have
the above six parts, especially the single process module, but the working parts
and necessary fixed parts are indispensable.
Stamping die are usually divided into two categories, one kind is craft
parts, the parts directly involved in the process is completed, and have the
direct contact and blank, only for mold complete process is not directly
involved in the process, also direct contact with blank, only to ensure that do
use mould to complete the process, or to improve the mold function, including
guide parts and fastening parts, standard parts and other parts, etc.
NITONI, As a China Precision Mold parts, Core pin, Ejector pin, Mold punch,
Mold parts, Mold components, Non-standard Precision Parts, plastic mold parts,
press die mold parts, manufactur and supplier,At present, The mould accessories
products are mainly divided into Non-standard mold parts, Plastic mould parts,
Press die mold parts, Die Springs,